iptables防火墙管理 2016-10-09 • Lu Tao ubuntu14.04 防火墙基本设置 sudo iptables -L sudo iptables -S sudo iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT #接受关联数据包的进入 sudo iptables -A INPUT -p tcp --dport 22 -j ACCEPT #开放22端口上的ssh sudo iptables -A INPUT -p tcp --dport 80 -j ACCEPT #开放80端口上的http sudo iptables -I INPUT 1 -i lo -j ACCEPT #开放loopback接口上的权限 sudo iptables -A INPUT -p icmp -j ACCEPT #放行ICMP数据包 sudo iptables -P INPUT DROP #默认策略设为DROP # 持久化 sudo apt-get update sudo apt-get install iptables-persistent sudo invoke-rc.d iptables-persistent save 端口转发 # 设置端口转发,井号表示使用sudo权限 sudo iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 9000 # 如果删除该规则,重新绑定,则先查找出,然后使用行号删除 sudo iptables --line-numbers --list PREROUTING -t nat sudo iptables -t nat -D PREROUTING 行号 # 添加9000端口到iptables的INPUT ACCEPT规则中 sudo iptables -I INPUT -p tcp --dport 9000 -j ACCEPT # 设置本地访问80端口 sudo iptables -t nat -A OUTPUT -p tcp -d 127.0.0.1 --dport 80 -j DNAT --to 127.0.0.1:9000 sudo iptables -t nat -A OUTPUT -p tcp -d 本机IP --dport 80 -j DNAT --to 本机IP:9000 # 持久化 sudo /sbin/service iptables save(ubuntu中是/etc/init.d/iptables save命令) 完整设置 # Modify this file accordingly for your specific requirement. # http://www.thegeekstuff.com # 1. Delete all existing rules iptables -F # 2. Set default chain policies iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP # 3. Block a specific ip-address #BLOCK_THIS_IP="x.x.x.x" #iptables -A INPUT -s "$BLOCK_THIS_IP" -j DROP # 4. Allow ALL incoming SSH #iptables -A INPUT -i eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT #iptables -A OUTPUT -o eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT # 5. Allow incoming SSH only from a sepcific network #iptables -A INPUT -i eth0 -p tcp -s 192.168.200.0/24 --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT #iptables -A OUTPUT -o eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT # 6. Allow incoming HTTP #iptables -A INPUT -i eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT #iptables -A OUTPUT -o eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # Allow incoming HTTPS #iptables -A INPUT -i eth0 -p tcp --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT #iptables -A OUTPUT -o eth0 -p tcp --sport 443 -m state --state ESTABLISHED -j ACCEPT # 7. MultiPorts (Allow incoming SSH, HTTP, and HTTPS) iptables -A INPUT -i eth0 -p tcp -m multiport --dports 22,80,443 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp -m multiport --sports 22,80,443 -m state --state ESTABLISHED -j ACCEPT # 8. Allow outgoing SSH iptables -A OUTPUT -o eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT # 9. Allow outgoing SSH only to a specific network #iptables -A OUTPUT -o eth0 -p tcp -d 192.168.101.0/24 --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT #iptables -A INPUT -i eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT # 10. Allow outgoing HTTPS iptables -A OUTPUT -o eth0 -p tcp --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport 443 -m state --state ESTABLISHED -j ACCEPT # 11. Load balance incoming HTTPS traffic #iptables -A PREROUTING -i eth0 -p tcp --dport 443 -m state --state NEW -m nth --counter 0 --every 3 --packet 0 -j DNAT --to-destination 192.168.1.101:443 #iptables -A PREROUTING -i eth0 -p tcp --dport 443 -m state --state NEW -m nth --counter 0 --every 3 --packet 1 -j DNAT --to-destination 192.168.1.102:443 #iptables -A PREROUTING -i eth0 -p tcp --dport 443 -m state --state NEW -m nth --counter 0 --every 3 --packet 2 -j DNAT --to-destination 192.168.1.103:443 # 12. Ping from inside to outside iptables -A OUTPUT -p icmp --icmp-type echo-request -j ACCEPT iptables -A INPUT -p icmp --icmp-type echo-reply -j ACCEPT # 13. Ping from outside to inside iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT iptables -A OUTPUT -p icmp --icmp-type echo-reply -j ACCEPT # 14. Allow loopback access iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # 15. Allow packets from internal network to reach external network. # if eth1 is connected to external network (internet) # if eth0 is connected to internal network (192.168.1.x) iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT # 16. Allow outbound DNS #iptables -A OUTPUT -p udp -o eth0 --dport 53 -j ACCEPT #iptables -A INPUT -p udp -i eth0 --sport 53 -j ACCEPT # 17. Allow NIS Connections # rpcinfo -p | grep ypbind ; This port is 853 and 850 #iptables -A INPUT -p tcp --dport 111 -j ACCEPT #iptables -A INPUT -p udp --dport 111 -j ACCEPT #iptables -A INPUT -p tcp --dport 853 -j ACCEPT #iptables -A INPUT -p udp --dport 853 -j ACCEPT #iptables -A INPUT -p tcp --dport 850 -j ACCEPT #iptables -A INPUT -p udp --dport 850 -j ACCEPT # 18. Allow rsync from a specific network iptables -A INPUT -i eth0 -p tcp -s 192.168.101.0/24 --dport 873 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 873 -m state --state ESTABLISHED -j ACCEPT # 19. Allow MySQL connection only from a specific network iptables -A INPUT -i eth0 -p tcp -s 192.168.200.0/24 --dport 3306 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 3306 -m state --state ESTABLISHED -j ACCEPT # 20. Allow Sendmail or Postfix iptables -A INPUT -i eth0 -p tcp --dport 25 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 25 -m state --state ESTABLISHED -j ACCEPT # 21. Allow IMAP and IMAPS iptables -A INPUT -i eth0 -p tcp --dport 143 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 143 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 993 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 993 -m state --state ESTABLISHED -j ACCEPT # 22. Allow POP3 and POP3S iptables -A INPUT -i eth0 -p tcp --dport 110 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 110 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 995 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 995 -m state --state ESTABLISHED -j ACCEPT # 23. Prevent DoS attack iptables -A INPUT -p tcp --dport 80 -m limit --limit 25/minute --limit-burst 100 -j ACCEPT # 24. Port forwarding 422 to 22 iptables -t nat -A PREROUTING -p tcp -d 192.168.102.37 --dport 422 -j DNAT --to 192.168.102.37:22 iptables -A INPUT -i eth0 -p tcp --dport 422 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 422 -m state --state ESTABLISHED -j ACCEPT # 25. Log dropped packets iptables -N LOGGING iptables -A INPUT -j LOGGING iptables -A LOGGING -m limit --limit 2/min -j LOG --log-prefix "IPTables Packet Dropped: " --log-level 7 iptables -A LOGGING -j DROP 相关链接 谈谈iptables的NAT iptables-rules